Num'axes EYENIMAL PET VIDEOCAM Manual De Instrucciones página 14


Charging the battery
To charge the video camera, connect it to your computer using supplied
USB cable.
The indicator light lights up red and blue to indicate that charging is in
progress.
When the battery is fully charged, the indicator light turns blue.
The full charge time for the camera is approximately 1 hour.

Record in continuous mode
To turn the camera on and start recording in continuous mode, press the
button until the indicator light turns blue (about 2 seconds).
The indicator light flashes blue: the video camera records in continuous
mode.
To stop recording and turn the camera off, press the button
indicator light goes out (about 4 seconds).

Record in motion detection mode
To turn the camera on and start recording in motion detection mode, press
the button M until the indicator light turns blue and green (about 2
seconds).
The indicator light flashes blue and green: the video camera records in
motion detection mode.
To stop recording and turn the camera off, press the button M until the
indicator light goes out (about 4 seconds).

Night Vision
The infrared LEDs will activate automatically in low to dark lighting
conditions, irrespective of the recording mode selected.
until the
14