POLTI Forzaspira LECOLOGICO AQUA ALLERGY_NATURAL CARE Manual De Instrucciones página 22

PREPARATION OF THE APPLIANCE
• Remove the water container (6) from the
appliance, holding it by the handle (4) (Fig.1).
• Remove the filter assembly (16) (Fig.2).
Fill the water container (6) with ordinary
tap water up to the MAX H2O indicator (7)
as shown in figure 3. The required quantity
is 800ml. of water.
• Place the filter assembly (16) in the water
container (6), being careful to align them
perfectly.
• Put the water container (6) back inside the
appliance, performing the operations listed
above in reverse order.
• Insert the suction opening (D1) on the hose
(D) into connection (15) (Fig.4).
• Only for Forzaspira
Allergy _Turbo Care model insert the
batteries in the remote control handle as
illustrated in the section "Replacement of
remote control batteries".
THE PRODUCT IS NOT SUPPLIED WITH
BATTERIES.
FUNCTIONING
• Unwind the cable (13) to remove it
completely from its housing, pulling the
plug towards you (Fig.5).
• Plug into a suitable power outlet.
• Press the main switch (1) (Fig.6) and the first
level of the indicator lights (14) will begin
flashing. This means Forzaspira Lecologico
is in the pause position. Hold down the
button (18) for more than one second, then
release it. Forzaspira Lecologico will begin
operating at minimum speed, and the first
indicator light (14) will stay on.
• There are four
recommend minimum power for curtains,
medium/low power for sofas, armchairs
and cushions, medium/high for carpets and
high for floors and hard surfaces (ceramics,
marble, etc.).
• Press button (18) to increase speed; each
time you press button (18), the motor
power increases by one step. At each
speed increase a further level of the
indicator lights come on.
• Press button (19) to decrease speed; at
each speed decrease a further level of the
indicator lights goes out.
• To restore the appliance to the pause
position, hold down button (18) for more
than one second, then release it.
Lecologico Aqua
power levels. We
FUNCTIONING VIA REMOTE CONTROL
Only for Forzaspira Lecologico Aqua Allergy
_Turbo Care model
• Forzaspira Lecologico
advantage of operating by using the
buttons placed on the machine body or the
remote control handle without distinction.
In the latter case, you will have all the
functions on hand, without having to bend
down.
• Press the
Lecologico will
minimum speed and the first indicator light
(14) will stay on.
• In order to increase the speed, press the
button (22). Each time the button is
pressed (22) the power of the motor will be
increased by one level. Each time the
speed increases another level, the next
level of indicator lights come on.
• By pressing the button (23) the machine
does the opposite, each time the button is
pressed the power of the motor will
decrease and the light indicator will go out.
• To restore the appliance to the pause
position, hold down button (21).
TURBO FUNCTION
Only for Forzaspira Lecologico Aqua Allergy
_Turbo Care model
The Turbo function makes it possible to avail
of greater suction power for a limited period
of time.
Functioning:
• Take the suction power to the fourth speed
(all four light indicators (14) lit up).
• Press the button (18) or (22). At this point,
Forzaspira Lecologico suction power will
increase for a duration of around 10
seconds and then return to the fourth
speed. The overboost function is indicated
by the progressive lighting up of the light
indicators (14).
Note: For 20 seconds following the switching
off of this function, it is not possible to re-
activate it.
DRY – LIQUID SUCTION
The appliance can be used in the same way
to vacuum up dust or limited amount of
liquids. If the water is very dirty, replace it as
described in the section on "Emptying and
cleaning the water container". When the dirt
collected in the water container (6) reaches
| 22 |
offers you
button (21). Forzaspira
start to function
the
at