Publicidad
HDMI Port Display
This item selects the type of display device connected through the "HDMI Port" on this
motherboard.
[DVI]: Select this option if you are connecting a non-HDMI monitor through the "HDMI Port"
on this motherboard. This is the default setting.
[Normal]: Select this option if you are connecting HDMI digital display through the "HDMI
Port" on this motherboard.
An unmatched configuration will cause the display device abnormal. For example, an HDMI
digital device connected to "HDMI Port" under the [DVI] selection will have no sound on the
digital display, whereas a non-HDMI monitor connected to "HDMI Port" under the [Normal]
selection will cause the screen flickering. Select the correct one for your display device.
2.5 Integrated Peripherals
► OnChip IDE/SATA Device
► OnChip PCI Device
► Super-IO Device
► Onboard PCI Device
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
OnChip IDE/SATA Device
Click <Enter> key to enter its submenu:
Bus Master
OnChip SATA Controller
- OnChip SATA Mode
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
2-10
All manuals and user guides at all-guides.com
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
Press Enter
Press Enter
Press Enter
Press Enter
F6: Fail-Safe Defaults
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE/SATA Device
Enabled
Enabled
IDE
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
Item Help
F7: Optimized Defaults
F-I90HD
Publicidad
