Publicidad
Idiomas disponibles
Idiomas disponibles
3 Channel Lock determining that when users wish to
play the lock channels, whether have to input the
password or not. If the setting is "Yes", play the
channels with lock mark will show up a dialogue on
the screen and ask for the password. If the setting
of "Channel Lock" is "No", the Lock function will
invalid.
4 New Password is used for revising password; you
can input the new password in this item by using
number keys directly. After you filled in 4 digital
numbers, the highlight will auto skip to Confirm
Password and ask you to input the new password
again. If the password is correct, the screen will
show up a message of "Saving Data, Please
Wait...". After finish saving and drawback to
"System Setup" menu, the revising is complete.
5 Press [Exit] key to draw back from the "Parental
Lock" menu.
5.6
OSD Setting
When you input to "OSD Setting" menu, you will see a
screen like below:
1 OSD Display Duration: When you switch channels
in full screen, there will show up some information
about current channel on the lower of the screen.
And regarding to the duration of these information
show up on the screen, you can press [Volume
Up/Volume Down] key to set the time. The range
of the duration is "1 second ~ 10seconds".
2 OSD Transparency: You can press [Volume
Up/Volume Down] key to select the values. There
are 5 levels of transparency, 10%, 20%, 30%, and
40% and "Off" (means no transparency function).
3 Press [Exit] key to draw back from the "OSD
Setting" menu.
5.7
Other
1 In "LNB Power", there are two options, "On" and
"Off", for your selection. If the setting is "On", the
receiver will supply power to satellite antenna. If
the setting is "Off", the receiver won't supply power
to satellite antenna.
2 In "Channel Play type", you can set the channel
play type. You can select the "playing channels" as
"Free", "Scrambled" or "All".
²
For Example: If you select "Free", in full screen
play, all scrambled channels will be skipped
when you change channels by use [Channel
up/Channel Down] key.
3 BER: You can set BER On/Off.
4 Press [Exit] to draw back from "Other" menu.
TOOLS
6.
When you press [Menu] key to enter menu, there will
display the picture like below:
17
Publicidad
