GRE HPM20 Manual De Instrucciones página 61

2. Transport advertising
2.1 Delivery of the packaging
For the transportation, the heat pumps are fixed on the pallet and cover with a cardboard box.
To preserve from any damage, the heat pump must be transferred in its package.
It is the responsibility of the addressee to notify of any damage incurred during delivery within
48 hours. No responsibility can be taken once the unit has been signed for.
2.2 Stock advertising
* The warehouse should be bright, spacious, open, well ventilated, have ventilation equipment and no
fire source.
* Heat pump must be stored and transfer in vertical position in its original packaging. If it is not the case, it
cannot be operated until a minimum period of 24H has passed before the unit can have the electrical power
turned on.
FORBIDDEN
2.3 Transfer to the final position
* During the unpacking of the product and the transfer from the pallet to the final place of installation, it is
necessary to maintain the heat pump in a vertical position.
* Smoking and the use of flames are prohibited near R32machine.
Water connection are not to be used as load bearing handles. The manufacturer would not take the
responsibility in case of damage to the water pipes.
- 59 -