Makita DTS131RMJ Manual De Instrucciones página 5

All manuals and user guides at all-guides.com
ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Switch trigger
7 Lamp
8 Reversing switch lever
9 Changed in four steps
SPECIFICATIONS
Capacities
No load speed
Impacts per minute
Rated voltage
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Explanation of general view
10 Hard
11 Medium
12 Soft
13 T mode
14 Battery capacity
15 Bit
16 Sleeve
17 Bit-piece
18 Groove
Model
Machine screw
Standard bolt
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
D.C. 14.4 V Model
D.C. 18 V Model
ENE033-1
DTS131
4 mm – 8 mm
5 mm – 8 mm
0 – 3,000 min
0 – 2,000 min
0 – 1,200 min
0 – 1,200 min
0 – 2,500 min
0 – 2,200 min
0 – 1,400 min
0 – 1,400 min
D.C. 14.4 V
136 mm
1.2 – 1.4 kg
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
General Power Tool Safety Warnings
WARNING
instructions, illustrations
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
19 Hook
20 Screw
21 Vent
22 Standard bolt
23 Fastening torque
24 Fastening time (S)
25 Proper fastening torque
26 High tensile bolt
DTS141
4 mm – 8 mm
5 mm – 8 mm
–1
0 – 3,200 min
–1
0 – 2,000 min
–1
0 – 1,200 min
–1
0 – 1,200 min
–1
0 – 2,700 min
–1
0 – 2,200 min
–1
0 – 1,400 min
–1
0 – 1,400 min
D.C. 18 V
136 mm
1.3 – 1.6 kg
Read all safety
and specifications
–1
–1
–1
–1
–1
–1
–1
–1
GEA010-2
warnings,
5