Specifications - Echo RM-510ES Manual De Instrucciones

External dimensions:
Length × Width × Height
Mass:
Unit without cutting attachment, empty tank
Unit with specified cutting attachment, empty tank
Unit with specified cutting attachment, full tank
Volume: Fuel tank
Cutting attachment:
Specified blade diameter
Specified blade thickness
Number of cutting teeth
Blade centre hole diameter
Blade rotational speed at maximum allowable engine
speed
Gear ratio: Gear ratio and lubrication
Rotational direction of output shaft seen from above:
Engine:Type
Engine displacement
Maximum shaft brake power, measured in accordance
with ISO 8893
Engine speed at maximum engine power
Recommended maximum engine speed (With STD at-
tachment installed)
Recommended engine idling speed
Carburettor
Ignition
Spark plug
Starter
Clutch
Fuel:
Oil
Ratio
Fuel consumption at maximum engine power
Specific fuel consumption at maximum engine power
Sound pressure level: (ISO 22868) L
Guaranteed sound power level:(ISO 22868) L
Vibration levels: (ISO 22867)a
These specifications are subject to change without notice.
pAeq
WA
hv,eq

Specifications

mm 2770 × 360 × 560
kg 11.6
kg 12.1
kg 13.0
L 1.2
mm 255
mm 3.0
3
mm 25.4
r/min 10000
1.33 reduction and good quality lithium grease
Air cooled 2-stroke single cylinder
3
mL (cm ) 51.7
kW 1.87
r/min 8000
r/min 11400
r/min 2750
Diaphragm type
Flywheel magneto - CDI system
NGK BPMR7A
Recoil starter
Automatic centrifugal clutch
Regular grade petrol. Minimum 89 Octane unleaded
petrol is recommended. Do not use fuel containing
methyl alcohol or more than 10 % of ethyl alcohol.
Two stroke, air-cooled engine oil. ISO-L-EGD Stand-
ard (ISO/CD 13738), JASO FC,FD grade and ECHO
Premium 50 : 1 oil.
50 : 1 (2%)
L/h 1.15
g/(kW•h) 476
dB(A) 96.3
dB(A) 112
2
m/s Front handle 2.2
2
m/s Rear handle 2.6
39
Specifications
RM-510ES
Anticlockwise