Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting Tips ...
Save time and money! Review the charts on the following pages first and you may not need to call for service. If an
error occurs in the control operation, a fault code will flash in the display. Record the error code and call for service.
Problem
Surface elements will not
maintain a rolling boil or
cooking is slow
Surface elements do not
work properly
Scratches on cooktop
glass surface
Areas of discoloration on
the cooktop
Plastic melted to the
surface
Pitting (or indentation) of
the cooktop
18
Possible Cause
Improper cookware being used.
Cooktop controls improperly set.
Incorrect cleaning methods being used.
Cookware with rough bottoms being used
or coarse particles (salt or sand) were
between the cookware and the surface of
the cooktop. Cookware has been slid across
the cooktop surface.
Food spillovers not cleaned before next use.
Hot surface on a model with a light-colored
glass cooktop.
Hot cooktop came into contact with plastic
placed on the hot cooktop.
Hot sugar mixture spilled on the cooktop.
What To Do
the diameter of the surface unit selected.
Check to be sure the correct control is set for
the surface element you are using.
the Cleaning the glass cooktop section.
To avoid scratches, use the recommended
cleaning procedures. Make sure bottoms
of cookware are clean before use, and use
cookware with smooth bottoms.
See the Cleaning the glass cooktop section.
This is normal. The surface may appear
discolored when it is hot. This is temporary
and will disappear as the glass cools.
permanent damage section in the Cleaning
the glass cooktop section.
Call a qualified technician for replacement.
49-80745 Rev. 2
Publicidad
