Operating instructions
1.0 Important general information
1.1
Explanation of symbols
Several symbols are used to guide you through these instructions which draw your atten-
tion to important points:
Safety warning!
Indicates the possibility of damage to people or objects.
Safety warning!
Indicates the possibility of damage to people or objects from electrical components.
1.2
Safety warnings
STOBAG sun protection systems have been developed primarily as sun protection systems
and are built to satisfy the applicable standards. To prevent damage, sun protection sys-
tems may only be used under certain conditions in wet weather. At a minimum inclination
of 14°, equivalent to a 25% gradient, sun protection systems can stand light rain for a
short time.
Modifications may be made to a sun protection system or the configuration of an auto-
matic system with electric power only with the agreement of STOBAG or the specialist
supplier. Modifications to a sun protection system can create a dangerous situation and
considerable risk of damage to people or objects.
Any dismantling or re-installation may only be made by technically qualified and trained
personnel. It must be ensured that the correct brackets and fixing materials must be used
for the surface on which the system is to be installed. The height the system is installed at
must exclude the possibility of harming people as it is extended.
Important for electrically-powered sun protection systems! Risk of electric shock! Work on
electrical components may only be carried out by qualified electricians. Examine power
cables regularly for wear or other damage. The drive must never be used if the power
supply cable is damaged.
If there is a problem with the sun protection system, please contact your STOBAG special-
ist supplier.
All rights to make modifications are reserved
DE-27
EN-27
www.stobag.com |