Publicidad
Idiomas disponibles
Idiomas disponibles
Note: When using the sound mode, the unit will set to the last
sound listened to. If you wish to change it, first press the
POWER button to turn the unit on, then press the SOUND button
and toggle through until the sound of your choice is shown on the
LCD display, then press the POWER button to turn the unit off.
3. When the alarm is sounding, press the POWER BUTTON (Fig. 1) on the
unit to turn the alarm OFF. The alarm will come on again at the same
time on the next day.
Note: If the alarm sounds for 30 minutes continuously it will
automatically turn off and reset for the next day.
4. To stop the alarm from coming on the next day, press the AL1/AL2
button until the AL1 or AL2 icon disappears on the LCD display. If the
icon disappears, this indicates the alarm is disarmed.
Note: If one of the alarm users still needs their alarm set, you will
need to toggle through the AL1/AL2 button until the alarm that
corresponds to their wake time is shown on the LCD display.
Snooze Operation
1. Press the SNOOZE/NAP BUTTON (Fig. 1) on the unit while the alarm is
sounding. The alarm will go off for 9 minutes and then sound again. You
may use this feature until you turn the alarm OFF.
Note: After you have pressed the SNOOZE/NAP button once, you
may turn off the snooze function prior to the alarm activating again
by pressing the POWER button twice. The alarm will come on again
the next day at the same time.
1 4
Nap Operation
The NAP TIMER FUNCTION will wake you after a nap of 15, 30, 45, or 60
minutes without the need to change your regular Alarm 1 or Alarm 2 settings.
1. If the system is playing audio, press the POWER BUTTON to OFF.
2. Toggle through the SNOOZE/NAP BUTTON until the corresponding
time of your choice, 15, 30, 45, or 60 minutes, shows on the LCD
display.
3. Toggle through the AL MODE BUTTON until the corresponding icon
lights on the LCD display for the wake mode of your choice: iPod,
nature sound, radio, or beep (Fig. 2).
Note: To wake to iPod/iPhone, your iPod/iPhone must be properly
docked in the unit, or unit will default to beep wake mode.
Note: When using the sound mode, the unit will wake to the last
sound listened to. If you wish to change it, first press the POWER
button to turn the unit on, the press the SOUND button and toggle
through until the sound of your choice is shown on the LCD
display, then press the POWER button to turn the unit off.
4. The alarm will sound to wake you up after the selected amount of
minutes have passed.
5. To cancel the NAP TIMER, press the SNOOZE/NAP BUTTON, until OFF
shows on the LCD display, which indicates the NAP function is disarmed.
1 5
Publicidad
