Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND CLEANING
CLEANING INSTRUCTIONS
CARE AND CLEANING OF THE NON-STICK COATING
• Never iron over zippers, pins, snaps, buttons, or metal rivets as
these may scratch the SOLEPLATE.
• To clean the SOLEPLATE of occasional build-up, wipe cool
iron with a sudsy cloth. Do not use abrasive cleaners or metal
scouring pads.
EMPTYING AND STORING YOUR IRON
1. Turn the TEMPERATURE CONTROL DIAL to "MIN" and the
STEAM CONTROL to NO STEAM " ", unplug the iron and let
cool.
2. To empty water from the iron, slowly tilt the pointed end of
the iron over the sink. The water will run out of the WATER
FILL OPENING.
3. Wrap the cord loosely around the cool iron and store it upright
resting on the HEEL REST. Wrapping the cord too tightly
can damage the cord. Do not store the iron lying flat on the
SOLEPLATE, as any small amount of residue or moisture may
cause the SOLEPLATE to discolor.
E8
FABRIC GUIDES
The following table is designed to help select the best setting and
method for the fabric that you intend to iron. Verify the garment labels
and follow the recommendations provided by the manufacturer.
Position
Textile Type
Synthetics
Synthetics
Synthetics
Silk
Wool
Cotton
Linen
Fabrics
Acrylic
Polypropylene
Polyurethane
Acetate
Triacetate
Nylon
Polyester
Modal
Rayon
Silk
Wool
Cotton
Linen
E9
Publicidad
