Publicidad
Idiomas disponibles
Idiomas disponibles
INTERFACE
REAR VIEW
Pin 1
8 Audio Output
This is a connector for output of analog audio.
This connector is compatible with `Molex 70553`, choose a suitable connection cable.
Pin
Name
1
L
2
G
3
G
4
R
9 Device Configuration Jumper
Switch becomes ON when short socket is put.
Make sure the power of the drive is off before changing jumper setting.
Pin # 1 is ON at the time of shipping from the plant.
Pin
Name
1
MA
on The drive is used in master mode.
2
SL
on The drive is used in slave mode.
3
CS
on Using Cable Select function.
4
Reserved.
5
Reserved.
0 Cooling fan
This is a fan for cooling the drive.
Do not block the fan by other objects.
Drive Status
No disc is loaded, stand-by
Idle, Read, Write, Seek
- Host IDE Interface
This is a 40 pin I/O connector according to the ATA specifications.
= DC Input
Pin
Name
1
+12
2
G
3
G
4
+5
8
En
Pin 1
8
9
0
Function
Left channel audio output.
Ground.
Ground.
Right channel audio output.
Function
Function
Power supply input for DC +12 V.
Ground.
Ground.
Power supply input for DC +5 V.
Pin 1
Pin 1
-
=
Fan
Stop
Rotate
Publicidad
