Publicidad
Idiomas disponibles
Idiomas disponibles
Store a contact in memory
You can store up to 6 contacts.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or
[NUMBER DIAL], then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold one of the number buttons (1 to 6).
"STORED" appears when the contact is stored.
To erase a contact from the preset memory, select [NUMBER DIAL] in
2
step
and store a blank number.
Make a call from memory
1
Press
to enter Bluetooth mode.
2
Press one of the number buttons (1 to 6).
3
Press the volume knob to call.
"NO MEMORY" appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select [CALL HISTORY] or [PHONE BOOK], then
press the knob.
3
Turn the volume knob to select a contact.
If a contact is selected, press the volume knob to show the phone
number.
4
Press and hold the volume knob to enter delete mode.
5
Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then
press the knob.
DELETE ONE: Selected name or phone number in step 3 is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step 2 is deleted.
6
Turn the volume knob to select [YES] or [NO], then press the knob.
Bluetooth mode settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [BT MODE], then press the knob.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
PHONE SELECT
Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name.
AUDIO SELECT
DEVICE DELETE
1 Turn the volume knob to select a device to delete, then press the knob.
2 Turn the volume knob to select [YES] or [NO], then press the knob.
DVC PRIORITY
Selects a device to be connected as priority device.
" " appears in front of the device name set as priority.
*
"DL PB
" appear and transfer the phonebook of the connected phone
TRANSFER PB
to this unit manually.
* Selectable only when the connected phone supports OPP.
PIN CODE EDIT
Changes the PIN code (up to 6 digits).
(0000)
1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
1
Repeat steps
and
3 Press the volume knob to confirm.
RECONNECT
ON: The unit automatically reconnect when the Bluetooth device is within
range. ; OFF: Cancels.
AUTO PAIRING
ON: The unit automatically pair supported Bluetooth device (iPhone/iPod
touch) when it is connected through USB input terminal. Depending on
the iOS version of the connected iPhone/iPod touch, this function may not
work. ; OFF: Cancels.
BT HF/AUDIO
FRONT: Ouputs audio from the front left and right speakers. ;
ALL: Outputs audio from all the speakers.
INITIALIZE
YES: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.). ; NO: Cancels.
BLUETOOTH®
.
Default: XX
2
until you finish entering the PIN code.
ENGLISH |
15
Publicidad
