Panasonic VIERA TC-P42S30 Manual De Usuario página 17

Watching TV
■
Other Useful Functions
Listen with SAP (Secondary Audio Programming)
■
Select the Audio mode for watching TV
Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel.
Audio track 1 of 2
(English)
Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling SAP with their box.
Closed Caption
■
Switches the Closed Caption mode On or Off
Closed caption Off
Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.
Contact your Cable or Satellite operator for instructions on enabling CC with their box.
Displaying Information
■
Displays and removes information. When watching programming via the Antenna/Cable input,
shows the channel banner.
Channel
THE NEWS
15-2
ABC-HD
CC SAP TV-G 1080i Standard 4:3
Station
identifier
Closed caption
Turn power on
(Remote)
or
Select a channel number
up
or
down
• Also available side CH button on the unit.
[For Cable/Satellite box connection]
- Use your connected box's remote control.
Note
Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and antenna. (p. 14, 42)
The channel number and volume level remain the same even after the TV is turned
off.
Closed caption On
SAP Signal Picture
indication resolution mode
Rating Level
(TV) Note
Please select correct input -->
To directly enter the digital channel
number
example: CH15-1:
Closed caption On mute
Clock
12:30 PM
30
Sleep timer
remaining time
Aspect ratio
When tuning to a digital channel,
press the button to enter the minor
number in a compound channel
number.
(p. 21)
17