Publicidad
Idiomas disponibles
Idiomas disponibles
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
The unit should be placed on a stable, smooth surface (use the packaging). Do not
apply force onto the controls protruding from the hob.
apply force onto the controls protruding from the hob.
Locating the fixing brackets
•
The unit should be placed on a stable, smooth surface (use the packaging). Do not
The unit should be placed on a stable, smooth surface (use
apply force onto the controls protruding from the hob.
apply force onto the controls protruding from the hob.
•
Fix the hob on the work surface by screw four brackets on the bottom of hob (see
Fix the hob on the work surface by screw four brackets on the bottom of hob (see
picture) after installation.
•
Adjust the bracket position to suit for different work surface's thickness.
Adjust the bracket position to suit for different work surface's thi
Cautions
• The hob must be installed by qualified personnel or technicians. We have
The hob must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
rofessionals at your service. Please never conduct the operation by yourself.
• The hob shall not be mounted to cooling equipment, dishwashers and
The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
• The hob shall be installed such that better heat radiation can be ensured to enhance
The hob shall be installed such that better heat radiation can be ensured to enhance
its reliability.
• The wall and induced heating zone above the work surface shall withstand heat.
The wall and induced heating zone above the work surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
• A steam cleaner is not to be used.
• This ceramic can be connected only to a supply with system impedance no more
This ceramic can be connected only to a supply with system impedance no more
than 0.427 ohm. In case necessary, please consult your supply authority for system
than 0.427 ohm. In case necessary, please consult your supply authority for
impedance information.
22
22
Publicidad
