Insignia NS-LCD32FS Guia Del Usuario página 9

Insignia NS-LCD32FS 32" LCD TV
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to watch
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
watch scrambled channels using the
converter/descrambler controls.
RF switch
A
B
Out
TV
Cable converter/descrambler box
Connecting a sound system
To connect to a sound system:
1 Plug the S/PDIF optical cable into the S/PDIF
jack on the back of your TV.
2 Plug the other end of the S/PDIF cable into
the S/PDIF in jack on the sound system.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
For home theater systems, use an S/PDIF
(optical) cable to achieve full sound capabilities.
Audio processor
Stereo system
Two-set signal splitter
In
S/PDIF (optical)
cable
S/PDIF IN jack
OR
www.insignia-products.com
Connecting a VCR
You can connect a VCR with a standard
audio/video cable or with a S-Video cable. The
S-Video cable does not carry sound. If you use
an S-Video cable, you need to use audio cables
to connect the audio output.
Warning
Make sure that you turn off and unplug your TV
before installing devices.
Note
For better video, use the S-Video jack if your VCR
has an S-Video connection.
To connect a VCR and play a videotape:
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO in jacks on the back of
your TV.
2 Plug the other end of the audio/video cable
into the audio and video out jacks on the
VCR.
- OR -
Plug in the audio cables as described above,
then plug one end of an S-Video cable into
the S-Video jack on the back of your TV and
the other end into the S-Video jack on the
VCR.
3 Turn on your TV.
4 Press the INPUT button repeatedly to select
Composite1 (or S-Video if you connected
the VCR to the S-Video jack).
5 Turn on your VCR.
6 Insert a videotape, then press the PLAY
button.
S-Video cable
TV
Y=yellow (video)
W=white (audio left)
R=red (audio right)
VCR
OR
Video cable
Audio cable
9