Insignia NS-F24TV Guia Del Usuario página 15

Insignia NS-F24TV 24" Flat Panel Television
You can change the following settings:
CC STYLE—Sets a style for the words.
CC SIZE—Sets the size of the words.
CC COLOR—Sets a color for the text.
BK COLOR—Sets a background color.
CC OPACITY—Sets the opacity of the text
color.
BK OPACITY—Sets the opacity of the
background color.
EDGE COLOR—Sets a color for the edges.
EDGE TYPE—Sets an edge type.
5 Press EXIT to return to television viewing, or
press MENU to return to the previous menu.
Using the parental controls
Parental control enables parents to prevent their
children from watching inappropriate material on
the television. Parental control reads the ratings
for programming (except for news, sports,
unedited movies on premium cable, and
Emergency System signals), then denies access
to programming if the program's rating meets the
limitations you select.
To enter the P.LOCK menu:
1 With the television turned on, press MENU to
display the main menu.
2 Press or
3 Press or
4 Enter the password to enter the P.LOCK
menu. The initial password is 0000 and it can
be changed at any time.
Setting the initial P.LOCK password
To use the parental controls, you must first set
your password.
To set up the P.LOCK password:
1 Use the password to enter the P.LOCK menu.
The initial password is 0000.
to select P.LOCK.
to enter the P.LOCK menu.
www.insignia-products.com
2 Press or
PASSWORD, then press
menu.
3 Press or
PASSWORD, then use the number buttons to
enter a new password.
4 Enter the password again to confirm. Your
new password has been created.
Caution
Write down your password and save it for future
use.
Resetting a forgotten password
If you forget the password and you find that you
cannot enter the P.LOCK menu, you can reset
the password and then change it again.
To reset a forgotten password:
1 With the television turned on, press MENU to
display the main menu.
2 Press or
3 Press or
4 Enter the super password to enter the
P.LOCK menu. The super password is 1397.
After you finish entering the super password,
the SET CODE character appears.
5 Enter a new password (four-digit). The SET
CODE character changes to P.LOCK, the old
password has been cleared, and this new
password has been created.
Note
The super password 1397 will always work to
reset a password.
Turning on parental controls
To enable the blocking scheme you set up, you
must set PARENTAL LOCK to ON.
to highlight CHANGE
or to enter the
to highlight NEW
to select P.LOCK.
to enter the P.LOCK menu.
13