Publicidad
Idiomas disponibles
Idiomas disponibles
WATER SUPPLY CONNECTION
Water supply may be connected to the dishwasher in one of two ways:
- With metal braided hose.
- With copper tubing BRAIDED
HOSE/COPPER TUBING
After connections are made turn on the water supply to check for leaks.
Hot water supply line: Use minimum 3/4" O.D. copper tubing or metal braided dishwasher supply line.
"Water Inlet valve of dishwasher has 3/4"-11.5NH inlet coupling thread dimension according to
•
ASME B1.20.7-1991.
When you are buying water inlet hose for your dishwasher, please choose the thread dimension of
•
the inlet hose as compatible with indicated water inlet valve inlet coupling thread dimension (3/4"-
11.5NH) of your dishwasher.
Temperatures required for soldering and sweating will damage the dishwasher's water inlet valve so if
•
any such operation is needed, keep the heat source min. 77/8" (200mm) away from the dishwasher's
water inlet valve.
•There should not be any sharp bends in the water line that may restrict the water flow.
Teflon tape or pipe tread compound must be used for sealing the connection. Before connecting the
•
copper water supply line to the dishwasher, flush it with hot water to clear any foreign material.
10
Publicidad
