laxihub B1-TY Guía Rápida página 7

2 DC Power supply mode
Step 1 Remove the bracket.
Step 3 Fix the bracket on the wall
with screws and install the
doorbell into the bracket.
3 Double-sided tape mode
Step 1 Attach the double-sided adhesive tape to both sides of the bracket.
Step 2 Keep the doorbell close to a clean flat.
Set-up
Plug in
Plug the camera into an outlet. An audible sound
will play when the system is ready for operation.
tape
Step 2 Connect the DC power with
your wires.
12~24V DC
Step 4 Insert the battery compartment
into the doorbell.
Side
view
4
English