Publicidad
Idiomas disponibles
Idiomas disponibles
Entire pressure sprayer
Hoses and their screw
connectors
Spraying agent tank
Nozzles and
ball valve filter
Filling strainer
Cap gasket
Rechargeable battery
(and the spare battery if
you have one)
Never start working if there are any irregularities or leaks, if you can see any damage to the equipment
(including the support frame), if any of the adjustment settings are incorrect or if the equipment is not
working properly in any way. In this event have the device checked by an autorised SOLO workshop.
If you have any questions please refer to your authorised SOLO dealer.
Standard device with shut-off valve assembled on the high-pressure hose
Spray tube
Nozzle attachment including O-ring (10x2 mm)
Charger with EURO plug and 3 mains plug adapters for different countries
Sticker for the spraying agent tank: herbicide, fungicide and insecticide
These operating instructions, the EC declaration of conformity on a separate piece of paper
10 Maintenance plan
Check whether the device is safe to use:
Visual inspection of the device
Check the tightness of all equipment compo-
nents (at maximum permissible pressure with
open and closed shut-off valve)
Check the function of all active components
(shut-off valve, pump toggle switch, pressure
gauge (depending on the model))
Visual inspection
Visual inspection
Clean (section 9.8)
Clean (section 9.8)
Trial run to check the spray nozzles and the
ball valve filter by measuring the delivery rate
(section 9.3)
X*: A monthly trial run is required only if the
device is used frequently.
Visual inspection
Clean (section 9.8)
Grease (section 9.7)
Recharge (section 6.3)
11 Standard delivery
10 Maintenance plan / 11 Standard delivery
X
X
X
X
X
X
X
X
X
X
X
X
X*
X
X
X
X
X
X
ENGLISH 17
Publicidad
