GE RM91902 Manual De Instrucciones página 13

All manuals and user guides at all-guides.com
94902 Revised Size 2/25/02
Trouble Shooting
Solution
Pr oblem
A) Replace the batteries
Indicator Light not
blinking when you
press any key
B) Check that batteries
A) Try all the codes
The RM94905 does
not operate your
B) Try the Code Search
device
Not performing com- Start Code Search over again
to locate the proper code.
mands properly
Try the VCR code for your
Problems program-
brand. Some combo units,
ming a TV/VCR Combo
Unit however, may require both a
TV and a VCR code for full
operation.
As a safety feature on your
VCR not recording
remote, you must press the
REC button twice.
Channel up and down Due to some designs, the
original remote will only per -
do not function on an
form these functions.
RCA TV
If your original remote
Problems changing
required ENTER after a chan-
channels
nel, press ENTER after you
select a
channel.
A) Make sure you have
No response after
pressing a key
B) Check that batteries are
4:03 PM Page 13
(with fresh, new AAA
Alkaline batteries).
are properly installed.
listed for your brand.
method (page 11).
new batteries, and you
are aiming your
remote at your devices.
properly installed. See
page 3.
12