Descargar Imprimir esta página

ASROCK ALIVENF4G-DV Manual página 23

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 116
All manuals and user guides at all-guides.com
2.12
2.12 Installing Windows
2.12
2.12
2.12
Installing Windows
Installing Windows
Installing Windows
Installing Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
The installation procedures for Windows
If you just want to install Windows
your SATA / SATAII HDDs without RAID functions, you don't have to make a SATA /
SATAII driver diskette. Besides, there is no need for you to change the BIOS setting.
You can start to install Windows
your system directly.
2.13
2.13 Installing Windows
2.13
Installing Windows
Installing Windows
Installing Windows
2.13
2.13
Installing Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
XP 64-bit / Windows
The installation procedures for Windows
®
If you want to install Windows
2000, Windows
SATA / SATAII HDDs with RAID functions, please follow the below steps.
Before installing Windows
include SP4. If there is no SP4 included in your disk, please visit the below
website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/
spdeploy.htm#the_integrated_installation_fmay
STEP 1: Make a SATA / SATAII Driver Diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E.
The system will start to format the floppy diskette and copy SATA /
SATAII drivers into the floppy diskette.
STEP 2: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option from [non-RAID] to [RAID].
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
ASRock ALiveNF4G-DVI Motherboard
2000 / Windows
2000 / Windows
2000 / Windows
2000 / Windows
2000 / Windows
XP / Windows
XP / Windows
XP / Windows
XP / Windows
XP / Windows
®
®
Vista
Vista
Vista
Without RAID Functions
Without RAID Functions
Without RAID Functions
Vista
Vista
TM
TM
Without RAID Functions
Without RAID Functions
TM
TM
TM
®
®
Vista
TM
are subject to change.
®
®
2000, Windows
XP or Windows
®
®
2000, Windows
XP or Windows
2000 / Windows
2000 / Windows
2000 / Windows
XP / Windows
XP / Windows
XP / Windows
2000 / Windows
2000 / Windows
XP / Windows
XP / Windows
®
®
Vista
Vista
Vista
Vista
Vista
With RAID Functions
With RAID Functions
With RAID Functions
With RAID Functions
With RAID Functions
TM
TM
TM
TM
TM
®
®
TM
Vista
are subject to change.
®
®
XP or Windows
®
2000 to your system, your disk is supposed to
Advanced screen
IDE Configuration.
®
®
XP 64-bit on
®
XP 64-bit on
®
XP 64-bit on your
2 3
2 3
2 3
2 3
2 3

Publicidad

loading