SNOWJOE SUNJOE 24V-X2-16LM-CT Manual Del Operador página 12

3. Fit the upper handle frame onto the lower handle frame.
Insert the provided bolts into the aligned holes on the
frames and secure with the washers and the latches (Fig.
7). Screw and flip up the latches to lock the handle frames
in position.
4. Clip the cable clips on the handle to secure the cable
(Fig. 8).
Cable
clips
Grass Collection Bag Fitting
1. Fit the grass collection bag handle on the grass collection
bag by inserting the two tabs on the handle into the slots
on the bag, and pressing firmly until the handle clicks in
(Fig. 9).
Fig. 7
Upper handle
frame
Handle latch
+ washer +
bolt Grass
collection
bag
2. With the ejector flap lifted up, hold the grass collection
bag by the handle and hook it in from above onto the
hooks on both sides (Fig. 10).
Grass
collection
bag
Fig. 8
3. Release the ejector flap so that it rests on the grass bag.
Operation
This lawn mower is intended for private residential use to cut
grass in small lawns and gardens. This lawn mower is not
intended to cut grass in public parks, playing fields, farms or
forests. Do not use this lawn mower for any application other
than that for which it is intended.
Adjusting the Cutting Height
This cordless lawn mower is equipped with a 6-position height
adjustment lever to tailor grass cutting heights from 1.4 in. to
3 in. (35 mm to 75 mm). To change the cutting height of the
grass, follow the instructions below.
m
WARNING!
the batteries and the safety key from the lawn mower and wait
until the rotating blade has come to a complete standstill.
ALWAYS FOLLOW ALL SAFETY PRECAUTIONS AND
RECOMMENDATIONS LISTED PREVIOUSLY IN THIS
MANUAL.
12
Tab
Slot
Before making these adjustments, remove
Fig. 9
Grass
collection bag
handle
Tab
Slot
Fig. 10