Orbegozo MP 2000 Manual De Instrucciones página 18

MP 2000
- Put the screw ring in place until tight. Do not over tighten (fig. 13).
- Make the cover with the cylindrical nozzle (fig. 14)
- Shape the Kibbe as illustrated below and fry them
CLEANING AND MAINTENANCE
Disassembling
Make sure that the motor has stopped completely.

Disconnect the plug from the power outlet.

Disassemble by reversing the steps from 6-1 pictures.

To remove the cutting plate easily, place a screwdriver between the cutting plate and the head as

illustrated and lift it up (fig.10).
17