Descargar Imprimir esta página

Danby Designer DMW07A2SSDD Manual Del Propietário página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
RADIO FREQUENCY INTERFERENCE
This equipment generates and uses ISM frequencies
and if not installed and used properly in strict
accordance with the manufacturer's instructions,
it may cause interference to radio and television
reception. It has been type-tested and found to
comply with limits for ISM Equipment pursuant
to Part 18 of FCC Rules, which are designed
to provide reasonable protection against such
interference in a residential installation.
However, there is no guarantee that interference will
not occur in particular installations. If this equipment
does cause interference to radio or television
reception, which can be determined by turning
the equipment off and on, the interference can be
corrected by one or more of the following methods:
• Reorient the receiving antenna of radio or
television.
• Move the microwave oven away from the
receiver.
• Plug the microwave into a different outlet so that
microwave and receiver are on different branch
circuits.
The manufacturer is not responsible for any
radio or TV interference caused by unauthorized
modifi cation of this appliance. It is the responsibility
of the user to correct such interference.
AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY
• Do not attempt to operate the appliance with the
door open as this can result in harmful exposure
to microwave energy. Do not tamper with or
attempt to defeat the safety locks.
• Do not place any object between the front face
and the door or allow soil or cleaner residue to
accumulate on the sealing surfaces.
• Do not operate the appliance if it is damaged.
The door must close properly and there must be
no damage to the hinges, latches, door, door
seals or sealing surfaces.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an
electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the
electrical current.
This appliance is equipped with a cord that has a
grounding wire with a grounding plug. The power
cord must be plugged into an outlet that is properly
grounded. If the outlet is a standard 2-prong wall
outlet, it is your responsibility to have it replaced
with a properly grounded 3-prong wall outlet.
The serial rating plate indicates the voltage and
frequency the appliance is designed for.
WARNING - Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualifi ed electrician or service agent
if the grounding instructions are not completely
understood, or if doubt exists as to whether the
appliance is properly grounded.
DO NOT USE AN EXTENSION CORD
Do not connect your appliance to extension cords
or together with another appliance in the same wall
outlet. Do not splice the power cord. Do not under
any circumstances cut or remove the third ground
prong from the power cord.
If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similar qualifi ed person in order to avoid hazard.
SAFETY REQUIREMENTS
Ensure that component parts are replaced with like
components and that servicing is done by factory
authorized service personnel, to minimize the risk of
possible ignition due to incorrect parts or improper
service.
Children should be supervised to ensure that they
do not play with the appliance.
Do not cover or block any ventilation openings in
this appliance.
SAVE THESE INSTRUCTIONS!
2

Publicidad

loading

Este manual también es adecuado para:

Dmw07a2bssdd