Operating Instructions - Euronda AQUADIST Manual De Instrucciones

AQUA DIST
1. Fitting the activated charcoal sachet
Turn the lid with the hole and remove the the nozzle. Fold the activated charcoal sachet in half and
put it into the nozzle and reassemble the lid.
Place the lid with the hole over the collection bottle and align it with the spout of the distiller.
Each activated charcoal sachet can be used for up to a month.
Activated charcoal is not require if the water is used in a steriliser.
2. Pour water into the stainless steel tank. Use hot/cold water to fill the tank and take care not to
exceed the max level. If hot water is used, the distilling process will take loss time.
Secure the upper cover and plug the power cable into the distiller. Put the collection bottle and
protective cover in a safe place and make sure they are aligned. Plug the power cable into the socket
and turn on the power switch. The distilling process will start when the power switch is turned on
and automatically stops at the end of the process. To interrupt the distilling process, remove the
power cable from the socket.
PART 3

OPERATING INSTRUCTIONS

Activated
charcoal
Upper cover
power cable
Switch
Lid
Nozzle
Upper
cover
Distiller
socket
9