Publicidad
Idiomas disponibles
Idiomas disponibles
Description
1 (A). Steam head hook
1 (B). Clothes hanger hook
2.
Telescopic pole
3.
Steam head
4.
Handle with 'steam
on demand' system
5.
Flexible fabric hose
6.
Removable water tank
7.
Storage compartment
Garment Steamer Assembly
Pole assembly
1. Insert the telescopic pole into the base and turn
the locking ring to secure it into place -
2. Extend the pole so it is fully extended. and tighten
fig.1
the clips -
3. Insert the steam head hook on the top of the
telescopic pole -
4. Connect the hose to the base by turning the
connector on the end of the hose clockwise -
5. Place the steam head on the hook -
fig.3
Foldable and removable
This garment steamer is equipped with a foldable
and removable hanger in order to store the steamer
easily.
1. Insert it into the hole on the steam head hook -
fig.5
2. Press it vertically to tighten it on the hook -
3. Spread out the arms of the hanger -
4. Slide the ring to fix the hanger -
8.
ON/OFF switch and steam settings
9.
Power light indicator
10.
Wheels
11.
Hose connector
12.
Pole connector
13.
Fabric Brush
14.
Foldable and removable hanger
15.
Removable clips
16.
Boiler rinsing cap
fig.2
fig.2
fig.4
hanger assembly
EN
fig.6
fig.7 and 8
fig.9
3
Publicidad
