Vimar 40415 Manual Del Instalador página 14

PIXEL UP: 40415
4. Notification messages
The device displays a variety of notification messages, whose meanings are summarized in the following table.
Notification
Loading...
Communication Timeout
Registration Error
UPGRADE THE MODULES
Comm. Error
UPGRADE TO FONTS v.1
CHECK THE CONNECTIONS
INCORRECT INSTALLATION
For example, the following screen appears in
the device start-up phase and requires waiting
for the start-up phase to complete.
5. Indicators
The device has LEDs used specifically for signalling, in the top left-hand corner.
Icon LED
5.1 Normal operation
Status
Call in progress
Communication active
Lock activated
Missed communication (user busy or offline)
Video message recording in progress
14
Action required
Wait for the start-up phase to complete
Check the module connections and restart the electronic unit.
Check the module connections and restart the electronic unit.
Secondary module firmware updating in progress. If this persists for more than 1 minute,
update the audio/video unit firmware using the Video Door IP Manager software.
If the problem persists, please contact customer service.
Update the fonts on the display to version 1 using SaveProg, using SaveProg version
3.1.1.12 or later.
Check the connection to the electronic module and restart the device.
Incorrect installation. Check the guidelines provided in the instructions.
Loading...
Start-up
Colour
L1 Red
L2 Green
L3 Green
LED
L3 blinking
L3 ON
L2 ON
L1 ON
L3 ON, L1 blinking
EN