Profi Cook PC GK 1163 Instrucciones De Servicio página 55

Appliance Equipment Appliance Equipment Appliance Equipment Appliance Equipment
Appliance overview Appliance overview
Appliance overview Appliance overview
1 1 1 1 Bottle racks
3 3 3 3 Cold sink cover
5 5 5 5 Feet
Delivery scope Delivery scope
Delivery scope Delivery scope
3x Bottle rack, 1x door handle incl.
mounting screws
I I I I nstallation nstallation
nstallation nstallation
Conditions for the installation location Conditions for the installation location
Conditions for the installation location Conditions for the installation location
Good ventilation is required around
•
the appliance, in order to dissipate the
heat properly and to guarantee effi-
cient cooling operation at low power
consumption. Sufficient clearance is
necessary.
Gap to the back and to the side
-
walls each approx. 10 cm;
Place the appliance so that the
-
appliance door can open without
being impeded.
2 2 2 2 Cold sink fan
4 4 4 4 Ventilation slots
Only install at a location with an am-
•
bient temperature suitable for the cli-
mate class of the appliance. For in-
formation on the climate class, please
refer to the "EU Product Data Sheet"
or to the rating label located in the in-
terior or on the rear side of the appli-
ance.
Place the appliance on a steady and
•
safe surface. If the appliance is not
horizontally leveled, adjust the feet
accordingly (one or two adjustable
feet depending on the model).
Avoid the installation: Avoid the installation:
Avoid the installation: Avoid the installation:
•
near heaters, next to a stove, di-
-
rect sunlight or any other heat
sources;
at locations with high humidity
-
(e.g. outdoors, bathroom), as
metal parts would be susceptible
to corrosion under such circum-
stances;
near volatile or flammable materi-
-
als (e.g. gas, fuel, alcohol, paint,
etc.), in rooms which may have
poor air circulation (e.g. garages).
Do not expose the appliance any
-
weather.
55