JOVENTA BMS1.1 Manual De Instrucciones página 4

English
Ordering Codes
Codes Descriptions
BMS1.1 Actuator AC/DC 24 V
BMS1.1S Actuator AC/DC 24 V with 2 auxiliary switches
Technical Specifications
Actuators
Drive torque
Running time
Power supply
Frequency
Power consumption:
For wire sizing
Weight
Control signals
Position signal U DC 0...10 V / Ri > 10 k
Angle of rotation:
Auxiliary switch rating
Sound power level
Protection class
Degree of protection
Temperature: operating/store
Humidity
Maintenance
Compliance
BMS1.1(S)
8 Nm
30 s
AC 24 V ±20% / DC ±10%
50-60 Hz
- operating 2.5 W
- at end stops 0.3 W
6.0 VA / 3.6 A @ 2ms
1.1 kg
- Y1 DC 0...10 V / Ri > 250 k
- Y2 0...20 mA / Ri > 388 k
- Working range 90° (93° mech.)
- Limiting not possible
3(1.5) A, AC 230 V
45 dB (A)
II
IP 54 (with cable glands, cable downwards)
-20°...+50°C / -30°...+60°C
5...95% RH (not condensing).
Maintenance-free
Johnson Controls, Inc., declares that these products are in compliance
with the essential requirements and other relevant provisions of the
EMC Directive and Low Voltage Directive
IS_BMS1.1_14-88360-2110_Rev. E_04 2016
This document is subject to change without notice 2