Safety Warnings; Special Safety Instructions - EDM Koma Pro 08755 Manual De Instrucciones

Working Light

Safety Warnings

Power tools are repaired before use, when they are
damaged. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Cutting tools properly
maintained with sharp edges are less prone to jam and
easier to control.
g) Use the power tool, accessories and tool tips, etc. in
accordance with these instructions and taking into account
the working conditions and the work to be carried out. The
use of the power tool for applications other than those
envisaged could cause a hazardous situation.
5) Use and care of the battery
a) Make sure the switch is in the off position before inserting
the battery. Inserting the battery into the power tools that
have the switch on invites accidents.
b) Recharge only with the charger specified by the
manufacturer. A suitable charger for a type of battery pack
may create a risk of fire when used with another battery

Special safety instructions

• Please read and observe all safety warnings and instructions
enclosed with the battery or worklight with which the
battery was provided.
• Handle the cordless worklight with care. The cordless
worklight generates intense heat, which leads to increased
danger of fire and explosion.
• Do not work with the cordless worklight in hazardous areas.
• After the automatic shut-off of the cordless worklight, do
not continue to press the On/Off button. The
battery could become damaged.
• Do not direct the light beam at persons or animals and do
not stare into the light beam yourself (not
even from a distance).
• Use only original accessories.
• Do not cover off the lamp head while operating the cordless
CAUTION! Do not stare into the light beam for longer periods. The optical radiation
can be harmful for your eyes
Keep the minimum distance between the cordless worklight and all illuminated surfaces and objects.
0,2m
Illuminated objects may overheat if the worklight is less than this distance away from them.
• This cordless worklight is not intended for use by children
and persons with physical, sensory or mental limitations or a
lack of experience or knowledge.
• This cordless worklight can be used by children aged 8 or
older and by persons who have physical, sensory or mental
limitations or a lack of experience or knowledge if a person
responsible for their safety supervises them or has instructed
them in the safe operation of the cordless worklight and they
understand the associated dangers. Otherwise, there is a
INSTRUCTION MANUAL
EN
pack.
c) Use power tools only with specifically designated battery
packs. The use of any other battery pack may create a risk of
injury and fire.
d) When the battery is not in use, keep it away from other
metal objects such as paper clips, coins, keys, nails, screws or
other small metal objects that can make a connection from
one terminal to another. Shorting the terminals of the
battery may cause burns or a fire.
e) In abusive conditions, the liquid can be expelled from the
battery; avoid contact. In case of accidental contact, rinse
with water. If the liquid comes in contact with the eyes, also
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
6) Technical service
a) Have your power tool checked by a qualified repair service
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
worklight. The lamp head heats up during
operation and can cause burns when the heat accumulates.
• Do not use the cordless worklight in road traffic. The
cordless worklight is not approved for
illumination in road traffic.
• Before any work on the cordless worklight itself (e.g.
assembling, maintenance, etc.), as well as when
transporting and storing, remove the battery from the
cordless worklight.
• Do not allow children to use the cordless worklight. It is
intended for professional use. Children can
unintentionally blind themselves or other persons.
danger of operating errors and injuries.
• Use only the carrying handle to carry and align the cordless
worklight. The heat sink can heat up during operation.
• When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws, or
other small metal objects that can make a connection from
one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the
REF. 08755