Publicidad
Idiomas disponibles
Idiomas disponibles
This appliance is designed for household use only.
Description
1
Precision comb for beard and short hair
2
Trimmer head
3
Length selector
4
On/off switch
5
Power socket
6
Special cord set
7
Charging indicator
For electric specifications, see printing on the special cord set.
Charging
Recommended ambient temperature for charging is 41 °F to 95 ° F / 5 °C to
35 °C. The battery may not charge properly or at all under extreme low or
high temperatures. Recommended ambient temperature for trimming is
60 °F to 95 °F / 15 °C to 35 °C. Do not expose the appliance to temperatures
higher than 122 °F / 50 °C for extended periods of time.
• Connect the appliance via the special cord set (6) to an electrical outlet.
The appliance will only charge when it is switched off.
• A full charge takes approx. 10 hours and provides up to 40 minutes of
cordless operation time.
• The charging indicator (7) in the special cord set lights up continuously
when the appliance is being charged.
• Once the appliance is completely charged, discharge it through normal
use. Then recharge again to full capacity.
Trimming
• Click the precision comb (1) onto the trimmer head (2).
• Turn the length selector (3) to your desired cutting length. The comb
slides automatically up or down.
• Length settings precision comb (1): 1 to 10 mm in 0,5 mm steps
• Slide the on/off switch up to turn the appliance on.
• Trim against hair growth by guiding the flat comb part over the skin.
• Avoid clogging the comb with hair. Remove and clean it from time to time.
7
Publicidad
