HAMPTON BAY KZH8903AX-01/GW Manual De Instrucciones página 7

Installation (continued)
Determining the correct
6
length of chain
□
Use pliers and a screwdriver to twist open the link
at the end of the chain (JJ). Remove the open
links.
□
Turn the quick link (KK) open at the bottom end of
the chain (JJ). Remove the quick link (KK).
□
Take one open link and use it to attach the chain
(JJ) to the screw collar loop (II). Close the link.
□
Place the other end of the chain (JJ) through the
canopy (AA) and the ring (HH).
□
Use the quick link (KK) to attach the loop A (A) to
the chain (JJ), raising and lowering the fixture
until you achieve the desired height.
□
Once the desired height is achieved, use pliers
and a screwdriver to twist open the last unused
link of chain (JJ). Remove and save the excess
chain.
□
Fully closed the quick link (KK) to connect the
chain (JJ) to the loop (A).
CAUTION: To avoid damage to the links, only open a link
enough to hook onto another link (about 5 mm). Cover the
chain (JJ) with cloth to prevent damage to the link finish.
Making the electrical
7
connections
□
Weave the fixture wires up through the chain
(JJ), the ring (HH), the canopy (AA), the screw
collar loop (II), and the nipple (GG).
□
Wrap the ground wire from the fixture around
the ground screw (DD) on the mounting strap
(CC), and use a wire connector (BB) to connect it
to the ground wire from the outlet box.
□
Use a wire connector (BB) to connect the neutral
wire (marked with N) from the fixture to the
white wire (neutral wire) from the outlet box.
□
Use a wire connector (BB) to connect the live
wire (marked with H) from the fixture to the
black wire (live wire) from the outlet box.
□
Wrap the three wire connections with electrical
tape for a more secure connection.
□
Position the wires back inside the outlet box.
.
7
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM