Behringer EUROPORT MPA100BT Manual Del Usuario página 9

16 EUROPORT MPA100BT/MPA30BT
EUROPORT MPA100BT/MPA30BT Getting started
Step 3: Getting
(EN) Connect the MPA30BT/MPA100BT to
a power outlet by using the included
started
IEC power cable.
Turn all LEVEL knobs and the
MAIN LEVEL knob down to the
full counter-clockwise setting.
Connect all analog microphone,
instrument, and/or RCA cables to their
respective input jacks.
Power up the MPA30BT/MPA100BT by
pressing the POWER switch to the
"on" position.
If you are using BEHRINGER wireless
microphones, plug the wireless dongle
into the WIRELESS SYSTEM USB input.
The WIRELESS SYSTEM LEDs will light up when the
wireless microphones become active.
To pair a Bluetooth device with
the MPA40BT/MPA40BT-PRO,
follow these steps:
• Open Bluetooth in your mobile phone,
MP3 player or other Bluetooth equipment to
pair and connect.
• In your Bluetooth device, enter the PIN code: 0000
(Bluetooth version 2.0 and above will not require
a PIN code).
• If your Bluetooth device does not receive a
connection request, press and hold the Bluetooth
button until it fl ashes quickly, and then re-scan
for devices on your mobile phone or mp3 player.
17 Quick Start Guide
While playing music from your Bluetooth If you have an instrument plugged into
device, turn the BLUETOOTH/MP3 LEVEL an INPUT channel, play the instrument
knob to about the 50% position. and slowly rotate that channel's LEVEL
knob clockwise until you fi nd an acceptable level.
Slowly rotate the MAIN LEVEL knob
clockwise until you achieve a
comfortable listening level.
While speaking into each microphone,
slowly rotate the INPUT LEVEL
knob clockwise until you fi nd a clean,
clear sound. If a microphone signal sounds distorted, Balance all of the audio channels against
rotate the LEVEL knob slowly counter-clockwise until each other by adjusting each channel's
the sound cleans up. respective LEVEL knob until you fi nd an
acceptable mix.
Make fi nal adjustments to the
MAIN LEVEL knob.
Guitar