Bosch PSB 0004 A Guia De Inicio Rapido página 11

Power supply housings for wall mounting
1 Installation
Danger!
Risk of electric shock!
Death or serious injury through contact with live parts and wires.
Make sure that the device is disconnected from the power source before installation and
maintenance.
Notice!
IP30 conformity
If you break out the pre-cut cable entry points, ensure that the IP30 conformity is still
established, e.g. by using cable glands.
2 Technical data
PSS 0002 A
Housing material
Housing color
Dimensions
Weight
PSB 0004 A
Housing material
Housing color
Dimensions
Weight
Bosch Sicherheitssysteme GmbH
Sheet steel, painted
Slate gray RAL 7015
Front: anthracite gray RAL 7016
Approx. 267 x 440 x 149 mm
Approx. 6.4 kg
Sheet steel, painted
Slate gray RAL 7015
Front: anthracite gray RAL 7016
Approx. 502 x 440 x 149 mm
Approx. 11.4 kg
Quick installation guide
Installation | en 11
2019.12 | 6 | 4.998.154.010