LG VP182CR NKM3 Manual Del Usuario página 27

Using the Low Heating Function
This function operates the heating system to
maintain a minimum room temperature and
prevent objects in the room from freezing where
there is no permanent resident, such as a
vacation.
• , are displayed on the display screen.
NOTE
• This function is available with Heating Mode.
• During LH operation, when you press buttons
, MODE, FAN SPEED, and
such as ,
then return to Heating Mode.
• If JET MODE button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only
for power heating model)
• In case an error occurred, operation can be
interrupted for the protection of the product.
• COMFORT AIR and
used while the LH function is in operation.
Using the Mosquito Away
Function
This function fans away mosquitos by
generating a high-frequency wave.
is displayed on the display screen.
•
NOTE
• You can use this function without turning the
air conditioner on.
is displayed on some indoor units.
•
button cannot be
SWING
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit.
This function removes such moisture.
is displayed on the display screen.
•
NOTE
• Some functions cannot be used while the Auto
Clean function is in operation.
• If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.
• is displayed on some indoor units,
depending on the model.
EN
27