MADER GARDEN LSE2204 Manual De Instrucciones página 58

STEP 7: Attach the Cover A
1. Attach one end of the cover A (#98) with the top of the wedge using hex bolt M6x20 (#30), flat
washer Ø6 (#28) and lock washer Ø6 (#29). The other end is connected to the triangle using hex
bolt M6x12 (#96) and nylon lock nut M6 (#102). Slightly fixed, don't tighten the hardware.
STEP 8: Attach the Cover B
1. Attach one end of the cover B (#100) with the top of the wedge using hex bolt M6x20 (#30), flat
washer Ø6 (#28) and lock washer Ø6 (#29). The other end is connected to the beam using hex
socket bolt M8x20 (#99), flat washer Ø8 (#37) and hex lock nut M8 (#38). Slightly fixed, don't
tighten the hardware.
2. Tighten the hardware on the wedge first, then tighten the hardware on the beam.