Cleaning And Maintenance - Bestron AVC850A Manual Del Usuario

4. Press the button (7) to open the bottom flap (8) (see figure 5).
5. If so required, use your hand to remove any waste sticking to the container.
6. Close the bottom flap, and press until it clicks into place.
CLEANING AND MAINTENANCE - Cleaning the housing
1. Do not clean the vacuum cleaner during charging. Remove the adapter from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
WARNING:
• Never immerse the appliance, plug or power cord in water.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
CLEANING AND MAINTENANCE - Cleaning the turbo nozzle
1. Remove the turbo nozzle from
the vacuum cleaner. Push the
button (1) at the top of the tube
connection and pull the turbo
nozzle out.
2. Unlock the locking plate at
the bottom of the turbo nozzle
housing by sliding the slider
outwards (see figure 6A).
3. Remove the rotating brush
from the turbo nozzle (Figure
6B) and clean the rotating
brush.
4. Put the rotating brush back into
the turbo nozzle.
5. Mount the locking plate and
lock it by sliding the slider
inwards.
CLEANING AND MAINTENANCE - Cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
WARNING:
• Clean the filter regularly to avoid
that the filter becomes clogged and the
engine overheated.
1. Do not clean or replace the filter
during charging. Remove the adap-
ter from the wall socket.
2. Remove the tube from the vacuum
cleaner.
3. Remove the waste from the dust
container (see "Removing waste
from the dust container").
4. Remove the dust container from
the vacuum cleaner by pressing
the release button (see figure 7A)
and taking out the dust container (figure 7B).
5. Turn the upper lid and remove it from the dust container (figure 7C).
6. Take the dust separation system and filter from the dust separation system (figure 7D).
7. Rinse the filter and the dust separation system thoroughly in lukewarm water.
A
D
29
B
E
B
C
EN
6
A
7