Descargar Imprimir esta página

WERKU WK403140 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
ENG ORIGINAL INSTRUCTIONS
ERGONOMICS.
Less muscular force is required and the engine
power is more used. A body relaxed position and
the handling of the grip make easier the working
process. The mixer has been designed until the last
detail considering ergonomic aspects. Ergonomic
design handle in accordance with the position of the
hand; in order to work in a relaxed way and without
unnecessary efforts.
MAINTENANCE.
The mixer has been designed for a long working life
with minimum maintenance. Optimum use depends
on correct care of the mixer and regular cleaning.
To prevent accidents, always unplug the mixer from
the power source before cleaning or performing any
maintenance. The mixer may be cleaned effectively
using compressed air after each use. If compressed
air is not available, use a brush to remove dust from
the mixer. Motor ventilation vents and switch levers
must be dept clean and free of foreign matter. Do
not attempt to clean by inserting pointed objects
through openings. Cetain cleaning agents and
solvents damage plastic parts, among them are
gasoline, carbon tetrachloride, chlorinated cleaning
solvents,
ammonia
containing ammonia. Do not use any of these to
clean the mixer. Should excessive sparking occur,
have a Werku
official repair service exam and/or
®
replace the carbon brushes.
ENVIRONMENT PROTECTION.
The materials and components that have been
used to manufacture this product can be re-used
and recycled. Werku
Management System that is in charge of the co-
rrect elimination of the residues of this product. Do
not eliminate this product with domestic residues.
Werku
offers to its clients a free collection service
®
of these residues through any of its sale points, or
in the collection points established by the Integra-
ted Management System or in the recycling point
of your locality.
WARRANTY AND TECHNICAL SERVICE.
Werku
offers a warranty that covers the repair of
®
all defects found due to faults in the materials or
manufacture. For this cover to be effective it is ne-
cessary for these defects to appear within the vali-
dity period. The consumer is entitled to free repair
of all defects (shipping costs, labour costs and ma-
terials included), either via the repair or by replace-
ment (if necessary, with a later model). In any case,
and
household
is adhered to an Integrated
®
Werku
®
sent a disproportionate cost compared to the cost
of repair. This warranty does not affect consumer's
rights established by European or national laws.
The validity period of this warranty is 3 years. The
validity period starts on the date of purchase by the
first consumer. This date is shown on the invoice
or receipt of purchase. Any claims arising from this
warranty must be presented to the Werku
butor or the Werku
To do so you must present this warranty correctly
completed and stamped by the distributor, together
with the sales invoice or receipt. To require any in-
formation in relation to this warranty, the buyer and/
or distributor may contact the Technical Assistance
Service by telephone on +34 981 648 119, or by
e-mail at info@werku.com. This warranty does not
cover defects caused by parts that have worn out
from use other types of natural wear, defects cau-
sed by failure to observe the instructions for use
and operation, or for applications other than those
for which this product is intended, abnormal envi-
ronmental factors, overloading, or unsuitable main-
tenance or cleaning, faults caused by the use of
cleaners
spare parts, accessories or replacements that are
not original Werku
totally or partially disassembled, modified or repai-
red by personnel other than that of the Technical
Assistance Service or minimum and irrelevant irre-
gularities for suitable use or operation. Repairs and
replacements will not extend or renew the validity
period of this warranty. The replaced parts will be-
come the property of Werku
product to the Technical Assistance Service, and it
fails to comply with the conditions of this warran-
ty, all expenses and transportation risks shall be
paid by the buyer. This warranty is only valid within
the territory of the European Union. The company
responsible for the compliance of this warranty is
Werku Tools SA.
TECHNICAL ADVICE.
The technical department of Werku
posal to resolve any questions you may have re-
garding to its products. If you wish to contact our
team, send an e-mail to info@werku.com.
6
English
will not accept replacements if these repre-
Technical Assistance Service.
®
parts, if the product has been
®
. If the buyer sends the
®
distri-
®
is at your dis-
®

Publicidad

loading