MEI AC 2980 H Manual De Instrucoes página 32

Clean the wetted pad
Take down the air filter screen, then draw the wetted pad from the support. Clean the wetted pad with
neutral detergent and a soft brush, then rinse it with clear water. Finally, reinstall all pieces into the
appliance.
ATTENTION: The wetted pad must be installed horizontally, in order to avoid leaking.
Clean the water tank
Open the door and take out the water tank, clean it with neutral detergent, and wash it with clear water,
then reinstall to the appliance.
Clean the shell
Clean with neutral detergent and soft cloth. Do not leave any water on the surface of the control panel.
Problem
The appliance doesn't work
Low air flow
Model
Power supply
Power consumption – Cooling
Power consumption – Heating
Water tank capacity
Net weight
Gross weight
Dimensions
This appliance has been properly tested to the EU standards. During the warranty period, we will proceed
to the free removal - for repair or, in our decision, for replacement - of defects in the device or accessories *
TROUBLESHOOTHING
Probable cause
The appliance is turn off or with a
weak connection.
The button on the rear side of the
appliance is not turned on.
The air filter screen is blocked with
dust.
The air inlet is blocked.
TECHNICAL SPECIFICATIONS
WARRANTY
32
Solution
Insert the plug correctly in the
socket.
Press the button on the rear side of
the aappliance.
Remove the air filter screen and
clean it.
Remove whatever is blocking the
air inlet.
MEI AC 2980 H
230 V, 50 Hz
75 W
2000 W
5 L
7,84 Kg
10,42 Kg
460 x 360 x 845mm