Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
33945
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
FEATURES
- Power: 45W
- Speeds: 3 levels
- Fixed or Oscillating Position
- Security grille
- Diameter of the blades: 40cm
- Heights: min.100 - max.120cm
PARTS OF THE FAN
1. Grid clamping ring
2. Front of the grid
3. Fixer of the propeller
4. Helix
5. Grid bra
6. Back of the grid
7. Motor
8. Control panel
9. Rotation regulator
10. Fixing screw
11. Telescopic top tube (chromed)
12. Fixing ring
13. Telescopic bottom tube (white)
14. Cover
15. Base
ASSEMBLY INSTRUCTIONS FOR THE BASE AND THE BODY
1. Remove all packaging carefully, avoid scratching the plastic covers with scissors or knives.
2. Mount the base.
3. Fix the base of the telescopic bottom tube with the screws.
4. Stretch the upper telescopic tube inside the tube and x it with the ring.
5. Put the base of the rear cover of the motor and then use a nut to hold it.
6. Place the propeller on the front axle of the engine and then use the nut to secure it.
7. To nish, cover with the front protection using the clamping ring and close it with the screw.
8. Next, insert the completed fan body into the inner tube. And nally, use the nut to x the body fastener
with the ventialdor.
OPERATION OF THE FAN
9
Publicidad
