COMPONENT LIST
Storing of the cables
Included with the Battery charger are 4 pieces of "U"
shaped brackets. These should be assembled to the
rear of the charger. Both mains and
DC leads can be winded onto these
brackets for storage.
OPERATION
PLEASE READ CAREFULLY BEFORE USING
Suitable for all type of 12V lead acid,
Sealed, Leisure or Gel Batteries
batteries
between 20-120Ah.
1. Charging your battery
It is essential to disconnect the battery from the car. This will avoid possible damage to
the alternator. To avoid damage to the bodywork from possible spillage, remove the
battery completely from the vehicle. It is advisable to use gloves when handling the
battery, as there is a high possibility of corrosive acid being on the outside of the battery.
10