To Set The Alarm - Amplicomms TCL 400 Instrucciones De Uso

S
ETTING

To set the alarm

1. Press and hold AL SET/SELECT, the
alarm's hour digits flash. Press ▲ or ▼ to set the alarm in
hours (hold ▲/▼ to advance rapidly).
2. Press AL SET/SELECT once again, the alarm's minute
digits flash. Press ▲ or ▼ to set the alarm in minutes (hold
▲/▼ to advance rapidly).
3. Press AL SET/SELECT again, LED displays "HI" (vibration
at HI level), press ▲ or ▼ to select "LO" (vibration at Lo
level) if need.
Note: a shaker is not provided.
4. Press AL SET/SELECT once again, LED displays "F-1"
and flash, press ▲ or ▼ to select the alarm tone
(frequency).
• F-1 (low tone, 800 Hz)
• F-2 (mid tone, 1 KHz)
• F-3 (high tone, 1.5 KHz)
5. Press AL SET/SELECT once again or no button around 10
seconds to exit the alarm setting mode.
24
/ O
PERATION
Helpline UK 0844 800 6503
(See chapter "Helpline" for costs and hours of operation)
LED and the