Publicidad
Idiomas disponibles
Idiomas disponibles
DMX-CONTROLLED OPERATION
You can control the spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
For DMX-controlled operation set DIP Switch 10 to ON.
Addressing
Each projector occupies 6 channels. To ensure that the control signals are properly directed to each
projector, the projector requires addressing. This is to be adjusted for every single projector by changing the
DIP-switches as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more projectors are
addressed similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all LED MF-6 RGB Flower Effect devices, you may now start operating these via
your lighting controller.
DMX-protocol
Channel:
Value:
1
000 – 027
028 – 055
056 – 083
084 – 111
112 – 139
140 – 167
168 – 195
196 – 223
224 – 255
Channel:
Value:
2
000 - 255
Channel:
Value:
3
000 – 015
016 - 255
Function:
Dimming
3 color change
7 color change
Color Fade
Color Dream
Auto
Sound controlled 7 color change
Sound controlled 7 color dimming
Sound controlled 7 color change & 7 color dimming
Function:
Speed
Function:
Off
Flash
27/53
00030226.DOC, Version 1.0
Publicidad
