Overview Of The Lan Docking Stations - Philips LFH9160 Manual Del Usuario

the administration password to allow direct
communication with the LAN Docking Stations.
FTP server settings can also be accessed at a
later time by clicking the
the file menu.
If the directory is mapped to a shared network
folder:
Check the
1
LOCAL NETWORK DRIVE
button.
Enter the absolute path to the shared
2
upload directory or click the
button and select the folder.
Enter an administration password for direct
3
connections with LAN Docking Stations in
the field and confirm it in the
PASSWORD
field.
RE-ENTER
Click at the bottom of the configuration
4
OK
dialog.
User manual
SETTINGS button in
radio
BROWSE
If the directory is not mapped to a shared network
folder:
Check the
1
FTP SERVER
Enter the IP address or domain name of the
2
FTP server in the
Enter the FTP port number in the
3
Unless your FTP server is configured to use
a nonstandard port number, this should be
21.
Enter the user name and the password of the
4
account needed to log on to the FTP server
into the
USERNAME
Click the button at the bottom of the
5
OK
configuration dialog.
D Note
You will not be able to administer any LAN
Docking Stations until you provide valid
connection data to the FTP server and a valid
administration password.
Important: Remember that you can only
C
administer LAN Docking Stations sharing the
same FTP settings and administration password
at a time!
5.5 Overview of the LAN Docking
Stations
Upon start-up, the Administration Tool
automatically retrieves configuration data
from any LAN Docking Station, that placed
an identification file within the shared upload
directory on the FTP server, and displays the
data record in the application's main pane.
radio button.
field.
SERVER
field.
PORT
and fields.
PASSWORD
19