Publicidad
7
TERMINANDO LA INSTALACION
Slide the Canopy up over the Hanger Bracket and place the keyholes from Canopy over
the two screws from the Hanger Bracket. Rotate Canopy until it locks at the narrow
section of the keyholes. While holding the Canopy in place with one hand, slide the Canopy
Cover over the screw heads and rotate until snug. (Fig. 20)
CUBIERTA
NOTE:Adjust screws as needed until Canopy and Canopy Cover are snug. (Fig. 20)
Fig.20
ANILLO PARA LA CUBIERTA
Publicidad
