Glacier bay HDQFW6AC027CP Guía De Instalación Y Cuidado página 8

Installation (continued)
9
Attaching the horizontal rod and strap
□
Press the horizontal rod (R) down to ensure the stopper (L) is in the maximum open position.
□
Slide the clip (T) upward, adjust the location of the lift rod strap (S) to the appropriate height and insert the
horizontal rod (R) with the correct hole of the lift rod strap (S).
□
Move the lift rod strap (S) in or out to choose an appropriate location.
□
Slide the clip (R) downward until it secures with the horizontal rod (R).
NOTE: If the lift rod strap (S) is interfering with your installation, the lift rod strap (S) can be cut shorter. Once you have identified the
proper hole in the lift rod strap (S) that is necessary for your installation, you may cut off the bottom portion of the lift rod strap (S).
L
R
Hole
10
Checking the operation of the pop up
□
Operate the lift rod (U) up and down to verify that
the stopper (L) opens and closes correctly.
S
T
T
2
3
3
L
S
T
R
8
L
R
U
L
S
T
5