Descargar Imprimir esta página

Sony BRAVIA XR-55X90CJ Guía De Referencia página 8

Ocultar thumbs Ver también para BRAVIA XR-55X90CJ:

Publicidad

Idiomas disponibles

Idiomas disponibles

For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV's weight.
• The screws for installing the Wall-Mount
Bracket to the TV are not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
VS
• Refer to the following table for
wall-mount hole pattern.
Model Name
XR-75X90J /
75X90CJ
XR-65X90J /
65X90CJ
XR-55X90J /
55X90CJ
XR-50X90J
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied safety documentation for
additional safety information.
8
US
Screw (M6)
Wall-Mount Bracket
Wall-mount hole
pattern
×
300 × 300 mm
300 × 300 mm
300 × 300 mm
200 × 200 mm
• For more detailed information, visit Sony
Customer Support website.*
* Only on limited region/country/TV model.
1
Remove the screws from the rear of
the TV.
2
Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of
the TV (to make it parallel with the
wall).
VS
1.5 N·m
{15 kgf·cm}

Publicidad

loading