Urmet 1096 Guía Rápida página 3

ENGLISH
INSTALLATION
1 Make sure that no units are powered before starting the installation procedure.
2 Position the bracket to frame the required picture and fix it to the wall or other flat surface.
3 Connect the video output to the utility.
4 Power the camera.
OPERATING FEATURES
The camera may be operated only using the UTC controls available on the DVR/HDVR of the Urmet
catalogue implementing the function or by using the remote control Urmet code 1092/310. Refer to the
complete product documentation on the Urmet website to check for the list of available devices.
These controls can be used to access the OSD menu.
Refer to the respective product manuals for using the controls.
MENU USE
The camera ref. 1092/258H uses a multi-level menu that allows to enable/disable or change camera
settings.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed, the access first screen will be displayed.
Once the item has been selected, the parameter can be changed choosing among the available options.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item SAVE-EXIT and press
the central button.
To reactivate the default values select the item EXIT and press the central button.
Quick guide and complete user manual of the product are available at the
following link
Quick guide and complete user manual of the product are also available for DOWNLOAD from the URMET
website under the section USER MANUALS.
DS1092-558A
or it is possible to access to the next submenu,
3