Batavia MAXXPACK Nexxsaw BT-NXS002 Manual De Usuario página 14

English
using the tool, limiting working time, and
using accessories in good condition.
11. Accessories – optionally
available
Titanium coated chain . .Item-No. 7063765
Bar . . . . . . . . . . . . . Item-No. 7063846
Bar protector . . . . . . . Item-No. 7063647
Extension pole . . . . . . Item-No. 7063826
18 V Chain Sharpener . . Item-No. 7063640
12. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.
Batteries
12.1
Think of the environment when disposing of
batteries. Contact your local authorities to
find out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse. Do not dispose of by burning, risk of
explosion.
12
7063825-Nexxsaw-Ma-WF-2101-11.indb 12 7063825-Nexxsaw-Ma-WF-2101-11.indb 12
13. EC-Declaration of conformity
We, the Batavia B.V., Weth. Wassebali-
estraat 6d, NL-7951 SN Staphorst, declare
by our own responsibility that the product
Nexxsaw, Item-No 7063825, Model Nr.
BT–NXS002 is according to the basic
requirements, which are defined in the Euro-
pean Directives Electromagnetic Compati-
bility 2014/30/EU (EMC), 2006/42/EC
(Machinery), RoHS: 2011/65/EU and their
amendments. For the evaluation of con-
formity, the following harmonized standards
were consulted:
EN 55014-1:2017+A11;
EN 55014-2:2015;
EN 62841-1:2015;
EN ISO 12100.2010;
EN ISO 11680-1:2011;
AfPS GS 2019:01
Staphorst, 1 December 2020
Meino Seinen, QA Representative
Batavia B.V., Weth. Wassebaliestraat 6d,
7951 SN Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
28-03-2022 15:51 28-03-2022 15:51